|

| Tempstar
- Model: SmartComfort™ 94V
- Footprint (in inches): 48 by 19 1/8
by 26 3/8 by 28 1/2.
- Serviceability features: The SmartComfort
94V furnace is equipped with a troubleshooting LED fault
indicator that diagnoses practically all system-related
malfunctions. The indicator is located on the gas valve,
not in the blower section. The gas valve can be converted
to LP with a regulator spring change. Manifold pressures
can be measured via the pressure tap located on the manifold
next to the gas valve. The first- and second-stage regulators
are independently adjustable.
- Noise-reduction features: The unit has
two-stage heating and operates in the first stage 70% to
80% of the time, the company says. The enclosed burner compartment
eliminates most burner noise. Heavy-duty construction is
insulated to reduce sound levels.
- Additional features: These furnaces
feature a high-efficiency, variable-speed, dc blower motor;
dual certification for single- or two-pipe venting; stainless
steel primary and secondary heat exchangers; two-stage gas
valve; and two-stage combustion blower. The units are compatible
with single-stage thermostats. Hot surface to pilot ignition
with enhanced flame rectification includes igniter voltage
protection. Primary heat exchanger has a stainless steel,
rigid, pressed joint-serpentine design. Both primary and
secondary heat exchangers are stainless steel and backed
by a lifetime warranty.
|
 |
 |
Tempstar Is
The Sensible Choice For Comfort And Savings at a reasonable
price. |
Second Wind Air Purifier
The Complete Solution To Indoor Air Pollution
The Benefits:
-
Whole house air purification is integrated
into your forced air heating and cooling system
-
Allergy symptoms inside your home are
relieved
-
Neutralizes odors: pets, cooking, smoking
chemical, paint, solvents, carpet, etc
-
Enjoy the sweet smell of fresh air during
the entire year
-
Destroys micro organisms such as: spores,
molds, mildews, fungi, bacteria, viruses, and associated
odors
-
Registered as a class II medical device
-
CSA/NRTL approved. UL recognized
-
No costly filters or chemicals to replace
The Second Wind Air Purifier, with it's
completely unique process, combines two proven, time-tested
technologies. First, ultra-violet, anti-germicidal light,
which has been used successfully since 1936 in controlling
airborne living organisms, is introduced. Second, activated
oxygen atoms are created which cannot exist on their own.
Their sole purpose, during their 10-20 minute existence,
is to combine with airborne impurities. The resulting activated
atoms attach themselves to the contaminate and change either
the molecular structure, if the contaminate is a gas, or
by oxidation, if the contaminate is a particle.
The EPA tells us that the air inside your home can be
up to 40 times more polluted than the outdoor environment.
To test the effectiveness of the Second Wind Air Purifier
in eliminating airborne contaminates in an enclosed environment,
petri dishes were placed in a portable classroom and left
uncovered to accumulate any airborne contaminates. The
dish on the right, displaying the accumulated contaminates,
was removed. A portable Second Wind Air Purifier programmed
to run for three separate one hour periods within 24 hours
was then placed in the room. The dish on the left shows
the dramatic results. Over the 72 hours of the experiment,
100% of the contaminates were eliminated.
Analysis of what causes allergies
and aggravated respiratory problems by
the Center for Disease Control
What Can Be Used ToAddress
These Concerns?
PARTICULATES - Dirt, Dust, Pollen,
Spores - Upgraded Pleated Filtration/Electronic Air
Cleaner BIOAEROSOLS - Micro Organisms
- Ultra-Violet Anti-Germicidal light/Second Wind VOLATILE
ORGANIC COMPOUNDS - Pure Oxygen/Second
Wind |
 |
Important Facts
About Indoor Air Quality:
-
"Indoor air is found to be up to
40 times more polluted than outdoor air" EPA
-
"Most people spend 80-90% of their
time indoors" American Lung Association
-
50% of all illness is caused or aggravated
by polluted indoor air
-
The average person breathes 500 cubic
feet of air daily
-
There are up to 30 million dust and pollutant
particles in one cubic foot of air
-
The average home accumulates over 40
pounds of dust a year
Causes Of Sick Building Syndrome:
-
Inadequate ventilation
-
Indoor Contaminates: Personal Care Products,
Cleaning Products. Pets, Building Materials, Tobacco Smoke,
Cooking Odors, Trash, Excessive Moisture, Combustible
Products
-
Outdoor Generated Contaminates: Smog,
Combustion Products, Allergens, Dust, Dirt Pollen, Fine
Particulates, Living Organisms
-
Microbial Contaminates: Bacteria, Viruses,
Spores, Molds, Mildews, Fungi
-
Material Off-Gassing: Plywood, Waferboard,
Particle board, Pressed Wood Products such as: Furniture
Paints, Solvents, Glues, Laminates, Linoleum, Wood Flooring,
Draperies, Cleaning Supplies, Chemicals, Personal Care
Products, Pesticides
What you can't
see CAN hurt you!
|
|
|